SMALLRIG SR 4963

Coiled HDMI cable for professional camera setups

The SmallRig SR 4963 is a coiled HDMI data cable designed for connecting cameras, external monitors, wireless video transmitters and other equipment with full-sized HDMI ports. Its flexible spiral construction provides a practical alternative to conventional straight cables, helping maintain an organised camera setup while allowing connected devices to move relative to one another. The cable supports the HDMI 2.0 specification and video transmission at resolutions up to 4K at 60 Hz, making it suitable for modern photography and video production workflows. Its compact form, durable materials and standard HDMI Type-A connectors make it a useful accessory for camera rigs, handheld filming systems and professional monitoring configurations.

HDMI 2.0 support with 4K video transmission at 60 Hz

The SR 4963 complies with the HDMI 2.0 specification and supports video signals at resolutions up to 3840 × 2160 pixels with a refresh rate of 60 Hz. This capability allows compatible cameras to transmit detailed 4K video to external monitors, recorders and wireless transmission systems. The cable is suitable for applications requiring high-resolution monitoring, accurate composition and reliable signal transfer during recording. HDMI 2.0 compatibility also allows it to work with equipment using earlier HDMI specifications, provided the connected devices have the appropriate connectors. The actual available resolution, frame rate and video format depend on the capabilities and settings of the source and receiving devices.

Flexible coiled design for convenient cable management

The defining feature of the SmallRig SR 4963 is its spiral cable construction, which allows the cable to extend when additional distance is required and retract when the connected equipment is positioned closer together. This design helps reduce excess cable around the camera, minimising loose sections that could interfere with controls, accessories or the operator's movements. The coiled structure is particularly useful for handheld camera rigs, shoulder-mounted systems and setups where an external monitor is attached to an adjustable arm. As the position of the connected equipment changes, the cable can accommodate moderate movement without leaving a long section hanging freely. This contributes to a cleaner, more manageable camera configuration during filming.

Full-sized HDMI Type-A connectors on both ends

The SR 4963 is equipped with two full-sized HDMI Type-A male connectors, providing a direct connection between devices with standard HDMI ports. This configuration is suitable for cameras, monitors, external recorders and video transmitters that use full-sized HDMI interfaces. Compatible equipment includes the Blackmagic Design Pocket Cinema Camera 4K and 6K, Panasonic S1H, GH5 and GH5S, Z CAM E2, Atomos Ninja V and Hollyland Mars 400, among other devices. The cable is intended exclusively for full-sized HDMI connections and cannot be connected directly to Mini HDMI Type-C or Micro HDMI Type-D ports without a suitable adapter. Users should verify the connector type on both devices before selecting the cable.

Durable TPU and PVC construction

The SmallRig SR 4963 uses thermoplastic polyurethane (TPU) and polyvinyl chloride (PVC) materials to provide a balance of flexibility, strength and protection for the internal conductors. The flexible outer construction is designed to withstand the repeated extension and retraction associated with coiled cables, making it suitable for regular use in professional camera setups. The spiral design also helps reduce the amount of cable exposed to accidental pulling or contact with surrounding equipment. Its construction supports convenient handling during equipment assembly, transport and repositioning. As with any HDMI cable, excessive pulling, sharp bending near the connectors and mechanical stress should be avoided to preserve reliable signal transmission and extend the accessory's service life.

Extended length of 1.2 metres and lightweight design

The SmallRig SR 4963 has a fully extended length of approximately 1200 mm, providing sufficient reach for many camera-to-monitor and camera-to-transmitter connections. When not extended, its coiled design occupies considerably less space than a conventional straight cable of comparable length. The cable weighs approximately 45 ± 5 g, helping keep the overall weight of a camera rig low. Its specified dimensions when fully extended are approximately 1200 × 17 × 10 mm. The compact construction makes it practical for use with camera cages, monitor mounts and other accessories where available space may be limited. The flexible length allows users to position connected equipment according to the requirements of their shooting configuration while maintaining organised cable routing.

Practical accessory for video monitoring and recording

The SmallRig SR 4963 is designed for professional and enthusiast video workflows that require a dependable HDMI connection between compatible devices. It can be used to transmit a camera's video output to an external monitor for easier framing and focus evaluation, to an external recorder for supported recording functions, or to a wireless transmitter for remote monitoring. Its coiled design is especially beneficial when camera equipment is frequently repositioned or when several accessories are mounted close together. The package includes one SmallRig Coiled HDMI Data Cable (A to A) 4963 and a guarantee card. Combining 4K/60 Hz transmission support, full-sized HDMI connectors, flexible cable management and lightweight construction, the SR 4963 provides a practical connection solution for compact and professional camera rigs.

• SmallRig 4963 Coiled HDMI Data Cable (Type-A to Type-A) ×1
• Warranty Card ×1